Login | Register
United Kingdom

Label for Beer bottles

Contest details:
Bronze

  • Contest holder: Unglaube
  • Category: Other
  • Total budget: € 159.00
  • Start date : 22-03-2014 14:19
  • Ending date : 22-04-2014 14:10
  • Status : Ended
  • Required formats: jpg,ai,pdf,png
  • Relevant files: None
  • Available languages:
  • Number of designs: 33
  • Response rate:
    low high
RECEIVE DESIGNS NOW >

Needs:

Please create labels for beer bottles (flip-top), which also can be used as a logo for the home brewery.
The relation to the region should be considered. (Northern Germany/Moorland/Torfkahn). A drawing of a Torfkahn would be preferred.
At the front label the name of the brewery “Osterholzer Hausbrauerei” should occur, also the name of the beer “23er” and the beer type e.g. “Pilsener”, best before and alc %.
At the back label is a small description of the beer, ingrediants are listed and/or best before and alc % if not used on the front label.
Last but not leased a label on the bottle neck is required.

Company description:

This is a small beer home brewery.
The brand should have a strong relation to the local region of Northern Germany. Close by ist the Teufelsmoor, which is moorland. One symbol of the region ist the "Torfkahn" which is a little boat, that people used to ship turf. The beer will be filled up in small kegs, 1-Liter or two liter bottles with flip-top.

Target group:

Young to old

Colors, favourites and other requirements

This is an idea:
Medium Yellow around the side. There can be written the name of the brewery. The Torfkahn and Landscape in brown or black colour.
In the middle a light grey colour. The name of the beer type can be different, depends on the type. An example of an other beer brand
is attached, where they are using a tower instead of a Torfkahn.

ottox
  • Other # 331280 for Label for Beer bottles contest Submit complaint

    1. No comments

    2. This contest is finished. Its not possible to reply anymore.

  • Other # 329375 for Label for Beer bottles contest Submit complaint

    1. No comments

    2. This contest is finished. Its not possible to reply anymore.

  • Other # 329186 for Label for Beer bottles contest Submit complaint

    1. No comments

    2. This contest is finished. Its not possible to reply anymore.

  • Other # 329065 for Label for Beer bottles contest Submit complaint
    1. Unglaube says :

      Hallo,
      das Etikett ist sehr gelungen. Das Halsetikett sollte länglich und vertikal sein. Länge ca. 7,5 cm, da es den Flaschenbügel überdecken soll und somit als Siegel dient. Ich denke mit den Farben kann man ggf. noch etwas spielen. MfG

    2. This contest is finished. Its not possible to reply anymore.

  • Other # 327069 for Label for Beer bottles contest Submit complaint
    1. Unglaube says :

      Hallo,
      das Etikett gefällt mir sehr gut. Könnten Sie es mit etwas frischeren Farben variieren ? Braun sollte nicht die Hauptfarbe sein. Beim Flaschenetikett stelle ich mir oben als auch unten eine runde Form vor, Wenn Sie mir ihre e-mail Adresse schicken kann ich Ihnen ein Beispiel mit den Abmessungen schicken.

      Mit freundlichen Grüßen

    2. Unglaube says :

      Hallo,
      es muss heißen: beim Halsetikett stelle ich mir oben als auch unten eine runde Form vor. Die Länge ist ca. 8,5cm. Die beiden Kreise haben einen Durchmesser von ca. 2,7cm. MfG

    3. Unglaube says :

      Hallo,
      die Länge des Halsetiketts soll ca. 7,5cm sein. MfG

    4. This contest is finished. Its not possible to reply anymore.

  • Other # 326888 for Label for Beer bottles contest Submit complaint

    1. No comments

    2. This contest is finished. Its not possible to reply anymore.

Graphic categories
Getting Started
Brandsupply
Social Network

© Brandsupply, 2012 — 2024

  • Visa
  • Visa Electron
  • MasterCard
  • Wire Transfer
  • PayPal

Disclaimer & Privacy Policy terms & conditions Sitemap